Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 214)

P A R T T W O : C O M M A N D S
208
ISSUED: February 2005 WM-RCM-E Rev D
DISPLAY
PERSIST_COLOR, PECL
Command/Query
DESCRIPTION The PERSIST_COLOR command controls the color rendering
method of persistence traces.
The response to the PERSIST_COLOR? query indicates the color
rendering method, Analog Persistence or Color Graded Persistence.
See the Operator’s Manual.
COMMAND SYNTAX
PErsist_CoLor
<state>
<state> : = {ANALOG, COLOR_GRADED,3D}
QUERY SYNTAX
PErsist_CoLor?
RESPONSE FORMAT
PErsist_CoLor
<state>
EXAMPLE (GPIB) The following instruction sets the persistence trace color to an
intensity-graded range of the selected trace color:
CMD$=“PECL ANALOG”: CALL IBWRT(SCOPE%,CMD$)
RELATED COMMANDS PERSIST, PERSIST_LAST, PERSIST_SAT,
PERSIST_SETUP