Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 169)

Remote Control Commands and Queries
WM-RCM-E Rev D ISSUED: February 2005
163
DISPLAY
INTENSITY, INTS
Command/Query
DESCRIPTION The INTenSity command sets the intensity level of the grid. The
command TRACE,n is accepted for backward compatibility, but the
actual trace intensity is always 100%.
COMMAND SYNTAX
INTenSity GRID,<value>,TRACE,<value>[PCT]
<value>:= 0 to 100 (in percent). GRID and TRACE may be
interchanged; the order is immaterial.
QUERY SYNTAX
INTenSity?
RESPONSE FORMAT INTenSity TRACE,<value>,GRID,<value>
EXAMPLE (GPIB) The following example sets the grid intensity to 70%.
CMD$=”INTS GRID,70” : CALL
IBWRT(SCOPE%,CMD$)