Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 222)

P A R T T W O : C O M M A N D S
216
ISSUED: February 2005 WM-RCM-E Rev D
ACQUISITION
REFERENCE_CLOCK, RCLK
Command/Query
DESCRIPTION The REFERENCE_CLOCK command allows you to choose
between the internal reference clock and an external reference clock.
COMMAND SYNTAX
Reference_CLocK
<state>
<state>:= {INTERNAL, EXTERNAL}
QUERY SYNTAX
Reference_CLocK?
RESPONSE FORMAT <state>
EXAMPLE (GPIB)
The following instruction sets the instrument to use an external
reference clock:
CMD$=”RCLK EXTERNAL”:CALL IBWRT(SCOPE%,CMD$)