Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control User Manual
Page 198
P
A R T
T
W O
:
C O M M A N D S
192
ISSUED: February 2005
WM-RCM-E Rev D
<clock edge> : = {POS, NEG, ALL}
<levelN>, <low>, <high> : = 1 to 99 if level is specified in percent
(PCT), or
<levelN>, <low>, <high> : = Level in <sourceN> in the units of
the waveform.
<delay> : = -100 PCT to 100 PCT
<freq> : = 10 to 1e9 Hz (Narrow Band center frequency)
<hysteresis> : = 0.01 to 8 divisions
<length> : = 1e-9 to 0.001 seconds
<operator> : = {ADD, SUB, MUL, DIV}
*
<rank> : = 1 to 100
<threshold> : = 0 to 100 percent
<angular unit> = {PCT, DEG, RAD}
<cyclic> = {OFF, ON}
QUERY SYNTAX
PArameter_CUstom?
<column>
RESPONSE FORMAT
PArameter_Custom
<column>,<parameter>,<qualifier>[,<qualifier>,...]
AVAILABILITY
<sourceN> : = {C3, C4} only on four-channel oscilloscopes.
EXAMPLE 1
DTLEV
Command Example:
PACU 2,DTLEV,C1,POS,345E-3,C2,NEG,-789E-3
Query/Response Examples:
PACU? 2
returns:
PACU
2,DTLEV,C1,POS,345E-3,C2,NEG,-789E-3
PAVA? CUST2
returns:
C2:PAVA CUST2,789 NS
*
For Parameter Math option