Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 106)

96
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
Step 3
Click to end the recording.
When the recording session is finished, the bus traffic is saved to the hard drive as
a file named data.tfb or whatever name you assign as the default filename. While
the file is being saved, you should see a brown progress bar at the bottom of the
screen. When the bar turns white, it indicates that the data has been saved to disk.
Step 4 To save a current recording for future reference, Select Save As
under File on the Menu Bar.
OR
Click on the Tool Bar.
You see the standard Save As screen.
Step 5
Give the recording a unique name and save it to the
appropriate directory.
Editing an HCI Trace Configuration
To edit the HCI trace configuration,
Step 1
In the HCI page of Recording Options, click Edit.The Edit
HCI Trace Configuration dialog appears.
Step 2
Change the data in the data fields according to your desired
changes, and click OK. The changes are reflected in the
Extern page of Recording Options.
6.7 Recording Options - Events
If you have selected Event Trigger mode under the General tab in the
Recording Options screen, you may now select specific Bluetooth events
using the Events tab on the Recording Option Screen. You can also use the
Actions tab to define specific event sequences that will trigger BTTracer to
record a Bluetooth session.
In addition, the Events and Actions screens allow you to specify which
packets you want to include or exclude from the recording.