Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 57)

47
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
5. Recording Wizard
Recording Wizard is an interactive utility that presents a series of
user-friendly dialog boxes for setting up a recording session. Recording
Wizard serves as an alternative method of configuring the Recording
Options dialog box. When you are finished using the Wizard, you can view
your settings in the Recording Options window. By providing data to the
prompts in the Wizard’s dialog boxes, you configure BTTracer for a
recording session.
In BTTracer version 2.1, when using two modules, the Recording Wizard
can be used to synchronize to a piconet with a basic hopping sequence. The
Wizard does not support synchronizing to piconet using Adaptive
Frequency Hopping. Also, the Recording Wizard operates only over
Channel 1 of the analyzer.
Starting Recording Wizard
To start the Recording Wizard,
• Click on the Tool Bar or select Recording Wizard under Setup on the
Menu Bar.
You see the Recording Options window:
The Recording Options window has three buttons marked Next, Back, and
Cancel that allow you to move forward or backward through the wizard or
to cancel the wizard.
To begin advancing through the wizard,