Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 169)

159
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
Step 5
Click OK.
The search will then occur. Afterwards, the packets meeting the search criteria
will display.
Some Find Examples
Search for all DM1 and Poll packets with an Active Member Address of 7.
Step 1
From the Event Group, select Packet Types.
Step 2
From the box on the right, select DM1 and Poll.
Step 3 From the Event Group, select Header LT_Addr.
Step 4
From the box on the right, select LT_Addr=7.
Step 5
From the Center area, select Intersection.
Selecting Intersection tells BTTracer to find packets with ALL of the selected
traits.
Step 6 Press OK.
The trace should reposition to the first DM1 or Poll packet that has an Active
Member address of 7.
Exclude all DM1 and Poll Packets with Logical Transport Addresses of 7.
Step 1 Select Packet Types from the From the Event Group
Step 2 Select DM1 and Poll from the box on the right.
Step 3
Select Header LT_Addr from the Event Group.
Step 4
Select LT_Addr=7 from the box on the right.
Step 5 From the Center area, select Intersection and Exclusion
Step 6
Press OK.
The trace will redisplay so that it excludes DM1 packets with LT_Addr=7 and
Poll packets with LT_Addr=7.
Exclude all packets with ANY of the following attributes: DM1, Poll, or
LT_Addr=7.
Step 1
Select Packet Types from the Event Groups.
Step 2 Select DM1 and Poll from the box on the right.
Step 3
Select Header LT_Addr from Event Group.
Step 4
Select LT_Addr=7 from the box on the right
Step 5
Select Union and Exclusion.
Selecting Union causes the analyzer to search for any of the selected events.