Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 37)

27
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
Step 6
To complete the update, power cycle the analyzer (turn the
unit off then back on).
If you are running Windows 2000, the Analyzer will automatically
reboot, and the following message will appear:
Step 7 Click OK.
In this instance, you do not need to power cycle the Analyzer (turn
off then back on).
Manual Updates
If you prefer, you can manually update the Firmware, BT firmware and/or
BusEngine through the 'Analyzer Setup' dialog. To do this follow these
steps:
Step 1 Make sure that the BTTrainer application is not active.