Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 142)

132
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
9.3 Decoding and Viewing Higher Protocol Data
Higher protocol data can be decoded two ways: by clicking a decode button
on the toolbar or by selecting a decode command from a pull down menu.
Decoding Via the
Decoding Toolbar
The Decoding Toolbar has ten buttons for decoding packets, messages, and
protocols:
• Pkt (Display Packets)
• HCI (Display HCI Protocol)
• LMP (Display LMP Messages)
• L2CAP (Display L2CAP Messages)
• SDP Msg (Display SDP Protocol Messages)
• SDP Tra (Display SDP Transactions)
• TCS (Display TCS Protocol messages)
• RFCOMM (Display RFCOMM Protocol)
• OBEX (Display OBEX Protocol)
• OBEX Tra (Display OBEX Protocol Transactions)
• AT (Display AT Commands Protocol)
• HDLC (Display HDLC Protocol)
• PPP (Display PPP)
• HCRP (Display HCRP)
• AVCTP (Display AVCTP)
• AVDTP (Display AVDTP)
• BNEP (Display Bluetooth Network Encapsulation Protocol)
• HID (Display HID Protocol)
• IP (Display IP)
• TCP (Display TCP)
• UDP (Display UDP)
For example, to display LMP messages, click .
Note Once a decode has been performed, it will probably be necessary to scroll through
the display to find the decoded messages or protocols. You can shorten your
search by first clicking the Hide Unassociated Traffic button
.