Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 91)

81
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
Frequency Hopping
Stay with Basic Hopping - Configures the probe to use the Basic Hopping
sequence as defined by the Bluetooth 1.1 specification.
Follow AFH - Configures the probe to use the Adaptive Frequency Hopping
sequence as defined by the Bluetooth 1.2 specification.
Set... - Opens a dialog box for selecting the channels you would like
BTTracer to use.
LT_ADDr to Follow: Select devices to be followed.
Start with Predefined Channel Map: Tells BTTracer whether
to use the selected channel map from the table. Select an AFH
sequence from the list, check Start with Predefined Channel
Map, then click OK.
Add ...: Opens a dialog box for selecting multiple channels. You
can shift-click or control-click to select or deselect multiple
channels. Add a name to the box marked Name and then click OK
to close the dialog box and keep your selection.
Edit ...: Opens the dialog box shown above and lets you change the
current settings.
Delete: Deletes the selected AFH sequence.