Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual User Manual
Page 121
Advertising
![background image](/manuals/353523/121/background.png)
111
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.20
Event Sequencing
If you drag your mouse from one event button to another, you will create a
compound condition known as an Event Sequence. An event sequence is a
condition that says "Trigger when you see the following sequence of
packets." The example below may help to clarify.
This example means "Trigger when you see a packet with an Null Header
followed by a packet with a Poll Header."
To create an event sequence, perform the following steps:
Step 1
Select two events from the Events window
Step 2
Open the Actions window and click on one of the two Event
buttons.
An elastic arrow should appear.
Advertising