Teledyne LeCroy Merlin - Users Manual User Manual
Page 109
101
Merlin Protocol Analyzer User’s Manual
CATC
SW Version 2.0
Elastic Arrow
Elastic arrows allow you to associate Events, Counters, and Actions. To
make an association,
Step 1
Click the left mouse button on an Event button such as Hdr1
or Errors.
The elastic arrow appears.
Step 2
Drag the arrow to the desired Action button.
Step 3
With the pointer over an Actions button, click again the left
mouse button again.
The arrow is replaced with a black line connecting the Event button to
the Action button.
Event Sequencing
If you drag your mouse from one event button to another, you will create a
compound condition known as an Event Sequence. An event sequence is a
condition that says "Trigger when you see the following sequence of
packets." The example below may help to clarify.
This example means "Trigger when you see a packet with an Null Header
followed by a packet with a Poll Header."
To create an event sequence, perform the following steps:
Step 1
Select two events from the Events window