Teledyne LeCroy Merlin - Users Manual - Manual (Page 38)

30
Merlin Bluetooth Analyzer User’s Manual CATC SW Version 2.0
Note The most current Primary BusEngine file (Merlin.rbf) was copied to your
\CATC\Merlin directory when you installed the program.
Step 3
Click Open.
It is not necessary to restart the Analyzer. Once updated, the Analyzer takes
approximately 15 seconds to reinitialize, with Time Remaining displayed
on the screen. During this time the Trigger LED is on, indicating that
power-on diagnostics are being run. If there is a hardware failure, the
Trigger LED continues to blink after initialization is complete. If this
occurs, contact CATC for customer support.
3.6 Manual Firmware Updates
To manually update the firmware,
Step 1
Click Update Firmware on the Analyzer Setup screen.
You see the Select firmware file window:
The program has already automatically searched for the correct file and displays
it in the File name field.
Step 2 Click Open.
The Analyzer updates the Firmware.
Step 3 Unplug the USB cable from the back of the Analyzer box and then
reinsert it so the new Firmware update can take effect.