Teledyne LeCroy Merlin - Users Manual - Manual (Page 69)

61
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.0
The following dialog box will display:
Step 17
Press Retry or Back to re-attempt the process.
If the hardware failure described above do not occur, Merlin will conduct
an inquiry. The screen will show that Merlin is going to attempt a
recording in either ’Passive Sync & Record’ mode as shown below or in
’Sync & Record’ mode depending on the options you selected in Step 15.
Step 18
If you are recording in ’Passive Sync & Record’ mode, you will