Teledyne LeCroy Merlin - Users Manual - Manual (Page 155)

147
Merlin Protocol Analyzer User’s Manual CATC SW Version 2.0
10.2 Device List
Device List describes devices discovered in a previous inquiry or was
entered by the user. The list is stored in a file from one session to the next,
so the information one a device that was collected in previous sessions or
was manually entered can always be viewed.
By default, Device List appears at the bottom of the Merlin application
window. If is not open, you can open it by selecting View > Device List.
Fields in the Device List
• State -- Device State
• BD_ADDR -- Bluetooth Device Address
• Alias -- Whatever alias you entered for the device in the Add New
Device dialog
• Class -- The device class for each listed device
• Clock Freq -- Shows the device's Clock Frequency
• Security -- If Encryption is enabled, then this field will be marked
with a "Yes." You enter Encryption by clicking the Add Devices
button, and then clicking Options
• Last Update -- Shows when device information was last updated
• User Notes -- User comments. You add notes by clicking Add
Devices and entering text into the dialog box
Buttons
Edit Device -- Opens a dialog box for editing the device settings in the
Device List.
Add New Device -- Opens a dialog box for adding new devices to the list.
(You can also enter devices by performing an Inquiry.) This dialog box
lets you enter information that will appear in the device list: device
names, addresses, aliases, and comments.
Remove Device -- Removes the selected device from the Device List.