Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 131)

Compliance Device Test Catalyst Enterprises, Inc.
117
Executing a Compliance Device Test
Note: Be sure that your board is not involved in running any application program during
the Compliance Test.
Figure 105 Compliance Tests Configuration Dialog Box
Click the browse button to the right of the “Found Devices” field to have the TA700/
800 search for all PCI devices on the bus. The software will then display a list of
found devices with the ID code and the vendor code for each of the devices found on
the bus.
1. Select the device you like to perform the test on.
2. Choose the desired tests from the “Tests List” and click Add ->.
Test Description For a description of each test, click on a test and view the test description
on the bottom of the Compliance Tests Configuration dialog box.
Click “Start Test” from the Compliance drop down list on the menu bar to open
the Compliance Tests Configuration dialog box.