Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 244)

Catalyst Enterprises Inc. APPENDIX B
230
TA700 Power Draw
Board Model TA700 Rev F
Conditions for the measurements:
1. Current measured with PCIX6432, Fluke 75 Multimeter, HP1631D Storage
scope.
2. No Extended Memory (M700) installed.
3. Bus traffic generated from TST660 board.
4. TA700’s 3.3V generated internally.
Measurements.
Scenario 1. Board powered ON and idle. Interface cable not connected.
Scenario 2. Board configured and idle, SW session opened.
Scenario 3. Board running Analyzer test.
Bus Speed (MHz) Power Rail
Current Draw
(Amps)
Power Consumed
(Watts)
100 5V 2.21 11.05
66 5V 1.78 8.90
33 5V 1.19 5.95
Bus Speed (MHz) Power Rail
Current Draw
(Amps)
Power Consumed
(Watts)
100 5V 1.45 7.25
66 5V 1.42 7.10
33 5V 1.40 7.00
Bus Speed (MHz) Power Rail
Current Draw
(Amps)
Power Consumed
(Watts)
100 5V 2.95 14.75
66 5V 2.16 10.80
33 5V 1.38 6.90