Figure 119 active signals dialog box – Teledyne LeCroy TA700_800_850 User Manual User Manual
Page 147
Display Manipulation
Catalyst Enterprises, Inc.
133
Termination Display
In addition to the software determined termination, displayed in the
sample viewer CYCLE column, you may add a column to display a
hardware determined termination.
Note:
This feature is not available for the expansion memory in the TA700.
To display the hardware determined termination: Click the Setup Screen button in an open sample
window to open the Active Signals dialog box.
Figure 119 Active Signals Dialog Box
Click the down arrow next to the Group drop down list box, choose Tools, select
Termination, click Add-> and then OK to include it in the Active Signals list.
Figure 120 Hardware Determined Termination Included in Display
This feature is useful to display a hardware determined termination for cases where,
for some sequencer qualified captures, the software has insufficient data to decode a
termination.
Software determined termination
Hardware determined termination