Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 221)

Examples Catalyst Enterprises, Inc.
207
//-- Set same setting for all 8 Events
//-- IMPORTANT NOTICE
//-- At TA700ComApi pack, there is the file “TA700ApiCons.h”.
//-- With this file we declare some common values such as: EVN_NAME,
//-- EVN_XFER …, you can add this file to your VC++ project, or you
//-- Declare same values for other projects
//-- If you use this header file the tables below describe the values used.
Event Field
“nEventNo” is used to select which event to modify. See the table below for the valid parameters:
XFER type
STRNewValue
StrValue
A32 XFER_A32
D32 (Data XFERs only IRDY = 0, TRDY=0, DEVSEL=0) XFER_D32
D32 (Data XFERs including Wait Cycles, DEVSEL=0) XFER_D32S
MX32 (DE_Multiplex) XFER_MX32
A64 XFER_A64
D64 (Data XFERs only IRDY = 0, TRDY=0, DEVSEL=0) XFER_D64
D64 (Data XFERs including Wait Cycles, DEVSEL=0) XFER_D64S
MX64 (DE_Multiplex) XFER_MX64
IDLE XFER_IDLE
Per User Defined XFER_USER
EVENT NAME nEventNo
EV1 EVN_EV1
EV2 EVN_EV2
EV3 EVN_EV3
EV4 EVN_EV4
EV5 EVN_EV5