Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 84)

Catalyst Enterprises, Inc. Custom Capture Data Project
70
Limit to Current Slot You may qualify an event to be applicable to the transaction started at the
current slot only by setting the “Latched” option in the R/G dialog.
Alternate qualification A different way to qualify an event to the current slot is to double click
the XFER field and then select the desired latched transfer type LA32,
LMX32, LA64 or LMX64. These options are the same as A32, MX32
etc. except that they apply only to the slot that the TA700/800 is installed
in.
Figure 61 PCI Transfer Type Selection Dialog Box
PCI-X Attributes When operating as a PCI-X analyzer an additional transfer type choice,
Attributes, is enabled. See “PCI-X Attributes” on page 73 for
description.