Teledyne LeCroy TA700_800_850 User Manual - Manual (Page 254)

Catalyst Enterprises Inc. APPENDIX D
240
Status LED Function Description
D3, D11 When illuminated, the TA700PDC has been configured.
Jumper Configuration
TA700P +3.3V Power Source selection
TA700P +5V Power Source Selection
Connecting an External Power Supply
TA700 Power Up configuration
Note: The TA700P operating as a PCI agent requires 256 I/O space and 4 Meg of memory
from the host system.
J7 Trigger Out
JP2
Shunt 1-2 center to right +3.3V External Power
Shunt 2-3 center to left +3.3V Bus Power (Default)
JP3
Shunt 1-2 center to right +5V External Power
Shunt 2-3 center to left +5V Bus Power (Default)
JP1
JP1.1 Left pin +3.3VEX
JP1.2 Center pin +5VEX
JP1.3 Right pin GND
JP17
Open TA700P Declared as PCI agent (Default)
Closed TA700P Transparent to the System BIOS