NEWPORT iDRA Controller - Manual (Page 44)

40
READING 1:
Press d 8) Display flashes 1
st
digit of previous “Reading 1” value.
Press b & c 9) Enter “Reading 1” value. (Example 0000).
Press d 10) Display advances to OUT.1 Out 1 Submenu.
OUT 1:
Press d 11) Display flashes 1 st digit of previous “Out 1” value.
Press b & c 12) Enter “Out 1” value. (Example 00.00).
Press d 13) Display advances to RD2 Reading 2 Submenu.
READING 2:
Press d 14) Display flashes 1 st digit of previous “Reading 2” value.
Press b & c 15) Enter “Reading 2” value. (Example 9999).
Press d 16) Display advances to OUT.2 Out 2 Submenu.
OUT 2:
Press d 17) Display flashes 1 st t digit of previous “Out 2” value.
Press b & c 18) Enter “Out 2” value. (Example 10.00)
Press d 19) Display advances to the ALR2 Alarm 2 Menu.
The above example is for 0-10 V of the entire range of the Process Input
and Analog Output. For 0-20 mA output you need to set “Analog Type” to
Current and OUT 2 to 20.00.