WolfVision SCB-1 - Manual (Page 10)

SCB-1 Functions
R 8
5.8 On-Screen Menu
By pressing the MENU-key for 1 second, the on-screen menu appears on the screen. To
navigate in the menu, use the UP/DOWN-keys, LEFT/RIGHT-keys. The standard settings are
in italics. The menu can not be operated via SCOTI.
SCB-1 Menu:
Color Settings
White
Balance AUTO-TRACKING
ONE-PUSH
Trigger by pressing the WB-button (SHIFT+FREEZE)
MANUAL
R Gain +0 (-120 to +120)
G Gain +0 (-120 to +120)
Color/Contrast Setting 1 (0, 2)
Return
Misc Settings
Detail
High (OFF, MEDIUM)
Focus Priority MANUAL (AUTO)
Iris Priority MANUAL (AUTO)
Digital Zoom ON (OFF)
Dig. Zoom Warning STOP (MESSAGE, NONE)
AF Region CENTER (LARGE)
Return
Power-On Settings
Store
Power-On-Preset
Display Logo ON (OFF)
Return
Pos/Neg. Mode
POSITIVE (NEGATIVE)
Color / B/W COLOR (BLACK/WHITE)
Output Frequency 75Hz (60Hz)
Reset Complete Menu Are you sure YES
NO
Exit
Note: If a setting is marked with "!", then this setting is changed with the RS-232 control
software. This is only a temporary change until the camera is disconnected from the
power. To change a setting permanently, change the setting in the on-screen menu.
Color/Contrast Setting
Default is 1. For stronger contrast set to 0, for softer color-reproduction set to 2.
Detail
Also called contrast-enhancement or aperture. Default is HIGH. MEDIUM makes the picture
look softer, OFF disables the detail-function and outputs the data as seen from the CCD.
Display Logo
Default is ON. If changed to OFF, the "WolfVision SCB-1" logo is not displayed during
power-up.