WolfVision SCB-1 - Manual (Page 25)

SCB-1 Command List
R 23
User OSD
Firmware Update
Set Baud rate
Function H L Remarks
Activate User OSD
and Clear OSD 00 F2 0A 10 C Enables User-OSD-
Commands and resets the
OSD. SCB-1-OSD-Messages
and Menu are suppressed.
Disable User OSD 00 F2 0A 11 C Disables User-OSD-
Commands and allows Menu
and SCB-1-Messages.
First line double
Height on 00 F2 0A 12 C Default: off
First line double
Height off 00 F2 0A 13 C
Set line color 00 F4 0A 40 PL PC C PL: Line (0 to 14), PC: Color
(0 (black) to 7 (white,
default))
Write Line 00 Fx 0A 50 PL PC PT ... C PL: Line (0 to 14), PC:
Column (0 to 29), PT: ASCII-
Code of text (up to 30
characters per line) The
remainder of the line is not
deleted. (For longer texts you
need the long-packet-format!)
Get User OSD 00 F2 0A 60 C
Reply: 00 F2 60 D C D=0: User OSD inactive, 1:
User OSD active
Function H L Remarks
Enter Bootloader 00 Fx FF 10 Px P.. C Px...=Password
Get Version 00 F2 FF 60 C
Reply: 00 F2 60 V1 V2 .. Vx C Version-String (ASCII-Codes)
in Format “SCB-1 Vx.xxx”,
e.g. „SCB-1 V1.03a“
Function H L Remarks
SetBaudrate (non-
permanent) 00 F3 FF 20 P C P = Baudrate: 0=9600,
1=115200, 2=230400,
3=460800, 4=921600, 5=19200,
6=38400, 7=57600
Memorize current
Baudrate in EEPROM 00 F2 FF 21 C