WolfVision SCB-1 - Manual (Page 26)

SCB-1 SCB-Control Software
R 24
11. WolfVision Camera Control Software
The WolfVision Camera Control Software can be used to operate the SCB-1 XGA-color-
camera via SCOTI (RS-232). It is also possible to transmit images in preview- and full-
resolution to the PC.
Software Installation
Install Camera Control software (available on supplied CD-ROM or downloadable from
Internet
http://www.wolfvision.com/wolf/camera_control.exe ). Connect the SCB-1 camera to
the computer via RS-232 cable and start the Camera_Control.exe. At the start, the program
automatically scans COM1 to COM4 at all possible baud rates. If a SCB-1 camera is found
the connection is established, otherwise you can either retry or operate the software in the
demo-mode without a camera.
First, turn on the camera and then start the camera control software on your PC. The camera
control software (for Microsoft Windows 95, 98, ME, 2000 and XP) operates with the
SCB-1 via SCOTI (RS-232).
SCB-1 V1.03a connected at COM 1 (230400, N, 8, 1)