WolfVision SCB-1 - Manual (Page 8)

SCB-1 Functions
R 6
Auto Iris (AI)
The iris changes automatically according to the brightness of the subject. If ASC and / or
AGC are enabled, they change also automatically if necessary.
Auto Shutter Control (ASC)
If enabled, the shutter virtually extends the iris-range if the iris is closed as much as possible.
If disabled, the shutter can be set from 1 (very short exposure time) to 1188 (maximum
exposure time).
Auto Gain Control (AGC)
If enabled, the gain virtually extends the iris-range if the iris is fully opened. If the AGC is
disabled, it can be set to any gain-value from 0dB to 32dB.
Manual Iris
The iris can be opened or closed manually. If ASC or AGC are enabled, they extend the
possible adjustment-range. The Iris can also be set directly between 000 to FFF (in
hexadecimal), the higher the value, the brighter the picture.
Exposure Compensation
Exposure compensation allows you to fine-adjust the image-brightness in steps from -10
(darker) to +10 (brighter) in the auto-iris-mode.
5.4 White Balance
Each time the lighting conditions change, adjust the white balance so that the optimal color
reproduction is obtained.
• ATW:
Auto Tracking White Balance
The WB is automatically adjusted as the color temperature changes.
• One Push WB: One Push auto tracking White Balance (store values in Manual WB)
(OWB) Press the keys "Shift" + "Freeze" simultaneously, the message "White
Balance" appears on the screen while the white level is being
adjusted. When the adjustment is done, the message "White OK"
appears on the screen. The adjusted level is automatically stored in
the memory, even if the camera's power is turned off.
• Manual WB:
Manual control of R and B gain (-120 to +120 each)