WolfVision SCB-1 - Manual (Page 27)

SCB-Control Software SCB-1
R 25
Control of the SCB-1
Basic functions like Zoom and Focus are accessible on the left-side of the main-screen. For
further functions use the Control Panel (SCB-1 Interface board) or the User OSD Panel in the
Functions Menu. Virtually all commands can be performed with this program (the commands
without a button can be performed by entering the code directly in the "Extras - Custom
Command"-menu).
User I/O
The User I/O can be controlled and queried via RS-232 (SCOTI) and with the Interface board.
The User keys and LEDs can be used to build an application-specific user-interface which can
be controlled via SCOTI.
Image Transfer
To start an image-transfer, press either the PREVIEW-button for a quick preview at low
resolution, the CONT.(PREVIEW)-button for an continuous live preview or the GET FULL
PICTURE-button for a full resolution snapshot. In the PICTURE VIEW menu you can select
if the transmission of the full picture is done in an interleaved or a progressive way. The
interleaved (default) way has the advantage that you get a quick overall view (at low
resolution) of the picture which is refined during the transfer. The progressive way on the
other hand has optimum sharpness on all transmitted data, which is useful if you are not sure
if the captured picture is perfectly sharp or not. All image-transfers can be aborted by pressing
the ABORT-button below the progress bar which indicates how much of the transfer is
completed. Additionally, you can select in the PICTURE VIEW menu, how often the during
the transfer the screen is updated. Short update intervals increase the total transfer time. How
much the difference is depends on the speed of your PC. After transfer, you can either store
the image as .bmp-file or print it on a printer.