WolfVision SCB-1 - Manual (Page 23)

SCB-1 Command List
R 21
User I/O
Image
Function H L Remarks
Set User LEDs 00 F3 07 40 P C P=LED-Bit-Pattern (0 to 7), if
Bit is set, LED is on.
Bit 0: User-LED 1
Bit 1: User-LED 2
Bit 2: User-LED 3
Get User Keys 00 F2 07 60 C
Reply: 00 F2 60 K C K(bit 0): Userkey 1,
K(bit 1): Userkey 2,
K(bit 2): Userkey 3,
K(bit 3): Userkey 4
(1=pressed, 0=unpressed)
Function H L Remarks
Set XGA/60Hz 00 F2 08 10 C Change is memorized in
EEPROM
Set XGA/75Hz 00 F2 08 11 C Change is memorized in
EEPROM
Positive Mode 00 F2 08 12 C
Negative Mode 00 F2 08 13 C
Set Detail 00 F3 08 40 P C P=Detail: 0=OFF, 1=MED,
2=HIGH
Get Resolution 00 F2 08 60 C
Reply: 00 F3 60 10 F C 10=Color, XGA, 1CCD, F=V-
Frequency in Hz (e.g.
4Bhex=75Hz)
Get Positive/Negative 00 F2 08 61 C
Reply: 00 F2 60 N C N=0: Positive, N=1: Negative
Get Detail 00 F2 08 62 C
Reply: 00 F2 60 D C D=0: Detail off, 1:low, 2:high
Image Rotate 180° 00 F2 0C 10 C
Image orientated
normal 00 F2 0C 11 C Image not rotated and not
mirrored
Image mirrored hor. 00 F2 0C 12 C Image mirrored horizontally
Image mirrored vert. 00 F2 0C 13 C Image mirrored vertically
Store mirror/rotate
settings permanently 00 F2 0C 20 C