ZOLL E Series Monitor Defibrillator Rev G 12 Lead - Manual (Page 9)

12-Lead Reports
9650-1213-01 Rev. G 7
Patient Gender
Press the Gender softkey to toggle the highlight
between both genders displayed above the Gender
softkey. Press the Enter softkey to save the highlighted
gender and return to the Patient Information screen.
If you want to return to the Patient Information screen
without saving the highlighted gender, press the Return
softkey.
Patient Records
Press the Patient Records softkey to access the Patient
Records screen. Use this screen to transmit or print
specific 12-lead ECG records denoted by patient
identification number (ID #), date, and time.
Approximately 20 patient records can be stored on the
E Series. You can erase 12 lead patient record memory
by pressing and holding the summary button for 4
seconds and then pressing the Erase 12 Lead softkey.
Use the scroll keys on top of the unit to navigate through
the list of stored 12-lead records.
Press the appropriate softkey depending on what you
want to do:

1,%3



6S2

&2  P
P +J  55
(&*  ,,[

 

N3D

 
 
5HWXUQ
 
 
 

$JH


"
¾¾¾

"

&DQFHO
¾¾¾
  
3ULQW
5HFRUG
3ULQW
$OO
-81
-81
-81
   
   
-81
   
• Print All — When this softkey is selected, the unit
prints all stored 12-lead patient records on the strip
chart.
• Print Record — When this softkey is selected, the
unit prints the selected 12-lead patient record on the
strip chart.
• Transmit — When this softkey is selected, the unit
transmits the selected 12-lead patient record. The
Transmission Setup screen appears as described in
“Settings Softkey” on page 4.
• Return — When this softkey is selected, the unit exits
the Patient Records screen and displays the 12-lead
menu.
12-Lead Reports
Immediately after acquisition, the 12-lead data prints in
the following order:
1. 12-Lead ECG waveforms
2. Patient information
3. ECG analysis using the GE Marquette 12SL Analysis
Program (if configured)
4. Measurements matrix (if configured)
See the figures in the next section, “12-Lead ECG
Waveforms,” for a view of numbers 1, 2, and 4 above.
Optionally, you can configure the unit to print median
complexes in a 4x3 format or standard data in a 2x6
format for faxes. (Refer to the E Series Configuration
Guide for more details.)