ZOLL M Series CCT Defibrillator Rev A - Manual (Page 14)

M S ERIES CCT C ONFIGURATION G UIDE
10
Device Identifier
Sets an eleven-digit device identifier code. This code is divided into two sub codes (Site ID,
eight alphanumeric characters, and Device ID, three alphanumeric characters). The device
identifier is printed on the 12-lead strip chart, summary report, fax and Catalyst
™
MUSE
®
printouts.
Note:
If you are transmitting 12-lead ECG data to a Catalyst MUSE system, it is
recommended that you set up the device identifier.
Pressing the Change Value softkey causes the following screen to display:
Pressing the Prev Letter softkey moves the highlight left to the previous entered digit.
Pressing the Inc Letter or Dec Letter softkeys increments or decrements the selected digit.
Pressing the Next Letter softkey moves the highlight right to the next digit to be entered.
Pressing the Enter softkey selects the values that have been entered and returns to main
configuration menu.
6\VWHP&RQILJXUDWLRQ
,QF
/HWWHU
'HF
/HWWHU
3UHY
/HWWHU
1H[W
/HWWHU

(QWHU
6HW6LWH,'
 
6HW'HYLFH,'