ZOLL M Series CCT Defibrillator Rev A - Manual (Page 30)

M S ERIES CCT C ONFIGURATION G UIDE
26
Temperature Units
Sets the temperature measurement unit to °F or °C.
Display Colors
Allows the user to set individual display colors for parameters displayed on the M Series CCT
monitor.
Highlight the Display Colors option and press the Change Value softkey to display the
following screen:
Press the Change Value softkey to scroll through the available colors for each parameter.
Press the Next Item softkey to move to the next parameter in the table.
Press the Return softkey to save the values entered and return to the main configuration menu.
Power Up Trace Selection
Allows the user to set the parameter displayed on the second and third traces respectively on the
M Series CCT monitor when the unit is powered up.
Highlight the Power Up Trace Selection option and press the Change Value softkey to display
the following screen:
Press the Change Value softkey to scroll through the available parameters for each Trace
selection.
Press the Next Item softkey to move to the next Trace selection in the table.
Press the Return softkey to save the values entered and return to the main configuration menu.

6\VWHP&RQILJXUDWLRQ
3UHY
,WHP
1H[W
,WHP
&KDQJH
9DOXH 5HWXUQ
',63/$<&2/256
6HWWR
'HIDXOWV
5HG
&\DQ
5HG
<HOORZ
&\DQ
:KLWH 3
3
$57
3$
&93
,&3 (&*
6S2
(W&2
1,%3
7HPS
*UHHQ
<HOORZ
%OXH
:KLWH
3XUSOH

6\VWHP&RQILJXUDWLRQ
3UHY
,WHP
1H[W
,WHP
&KDQJH
9DOXH 5HWXUQ
32:(58375$&(6(/(&7,21

6(/(&775$&(
$732:(583
6(/(&775$&(
$732:(583
2II
2II