ZOLL Propaq MD Rev C - Manual (Page 156)

C HAPTER 12 M ONITORING T EMPERATURE
12-2 www.zoll.com 9650-0806-01 Rev. C
Warning! • The application and use of metal-jacketed temperature probes that come in contact
with conductive objects or clinical personnel during electrocautery may cause burns
at the point of contact between the patient and the temperature probe.
• Use only ZOLL-approved temperature probes. The use of non-approved probes may
result in accurate measurements.
Connecting the Temperature Probe
To connect the temperature probe, insert the probe’s 1/4” plug into one of the two connection
jacks on the side of the Propaq MD unit.
Figure 12-1 Connecting the Temperature Probe to the Propaq MD Unit
Displaying Temperature
When you connect the probe, the unit displays the temperature after a brief pause. The Propaq
MD unit displays temperature as a numeric value in the Temperature window. You can specify
that the unit display the temperature in
 C or  F.