ZOLL Propaq MD Rev C - Manual (Page 237)

Treatment Summary Report
9650-0806-01 Rev. C Propaq MD Operator’s Guide 21–3
Note: If you attempt to print a snapshot before the unit has finished storing the snapshot in
the log, a NO DATA AVAILABLE message is printed. To print the snapshot correctly,
wait until the snapshot is complete, then select and print it again.
Treatment Summary Report
The Treatment Summary Report is a report that shows all of the treatment events related to a
patient such as defibrillation/pacer events, alarm events, and treatment snapshots. It is helpful
to print out this report at the end of a case.
TREATMENT SUMARY REPORT
Name: Phillip Davies
06:06:14 New Case ID
ID: Patient 0015 Patient Mode: Adult 06:06:14 System On
Start Time: 06/06/12 06:06:14 06:06:14 Patient Mode Adult
Last Event: 06/06/12 09:43:40 06:06:14 Some Alarm Limits Disabled
Elapsed Time: 00:29:48 # Events: 06:06:20 Self Test Passed
Total Shocks: 1 06:06:43 Treatment Snapshot: ASA
Total Pace Time: 00:00:00
Total 12 Leads: 0
Dept: ICU
Unit:
S/N: 0 SW: 00.00.00.00