ZOLL R Series Monitor Defibrillator Rev A NIBP - Manual (Page 7)

How Do I Read the Display?
9650-0914-01 Rev. A R Series Non-Invasive Blood Pressure (NIBP) 5
How Do I Read the Display?
After each measurement, the NIBP display area displays measured systolic, diastolic, and mean
blood pressure values.
To facilitate quick reaction in emergency situations, you can control certain NIBP features by
pressing the NIBP button (
) at the lower left-hand corner of the unit. To access other NIBP
features, you must press a softkey with the appropriate softkey label.
Note: Depending on the options included in your R Series unit, your display may differ
slightly from the illustrations in this insert.
The NIBP display area on the left side of the monitor screen consists of:
• Symbols that represent the status of blood pressure measurements.
• Numbers that represent the measurement values (refer to the following figure).
When taking a reading, the screen will display only the current cuff pressure.
Softkey Label
3
1
SHOCK SHOCK
2
ENERGY
SELECT
ENERGY
SELECT
ANALYZE ANALYZE CHARGE CHARGE
OUTPUT
mA
OUTPUT
mA
RATE
ppm
RATE
ppm
4:1
LEAD
SIZE
ALARM
SUSPEND
RECORDER
DEFIB
OFF
MONITOR
PACER
Options Param
Code
Marker
Report
Data Alarms
11:24
72
ECG
PADS
x1 SpO2%
CPR
0:00
IDLE
Depth
Rate 99
MONITOR
NIBP
ECG
mmHg
---
---
---
CO2
RR
Ɔ
---
---
mmHg
NIBP Button
Softkeys
NIBP
100
120
mmHg
P
80
*
Alarm
Diastolic BP
Systolic BP
Mean BP
* = artifact
Patient Type
(blank if Adult)
NIBP
Display
Area
Softkey Labels