IEI Integration PICOe-HM650 - Manual (Page 60)

PICOe-HM650 Half-size PCIe CPU Card
Page 46
4.2 Installation Considerations
NOTE:
The following installation notices and installation considerations should
be read and understood before the PICOe-HM650 is installed. All
installation notices pertaining to the installation of the PICOe-HM650
should be strictly adhered to. Failing to adhere to these precautions
may lead to severe damage of the PICOe-HM650 and injury to the
person installing the CPU card.
WARNING:
The installation instructions described in this manual should be
carefully followed in order to prevent damage to the PICOe-HM650,
PICOe-HM650 components and injury to the user.
Before and during the installation please DO the following:
ƒ Read the user manual:
o The user manual provides a complete description of the PICOe-HM650
installation instructions and configuration options.
ƒ Wear an electrostatic discharge cuff (ESD):
o Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.
ƒ Place the PICOe-HM650 on an antistatic pad:
o When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.
ƒ Turn all power to the PICOe-HM650 off:
o When working with the PICOe-HM650, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.