IEI Integration PICOe-HM650 - Manual (Page 71)

PICOe-HM650 Half-size PCIe CPU Card
Page 57
4.4.3 LVDS Voltage Selection Jumper
WARNING:
Incorrect voltages can destroy the LCD panel. Make sure to select a
voltage that matches the voltage required by the LCD panel.
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-4
Jumper Location: See Figure 4-10
The LCD voltage selection jumper sets the voltage of the power supplied to the LCD
panel.
Setting Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5.0 V
Table 4-4: LVDS Voltage Selection Jumper Settings
Figure 4-10: LVDS Voltage Selection Jumper Location