3 vga monitor connection, Figure 4-20: usb connector – IEI Integration PICOe-HM650 User Manual
Page 82
PICOe-HM650 Half-size PCIe CPU Card
Page 68
Series "A" receptacle connectors are shown in Chapter 3.
Step 2:
Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
7
Figure
4-20.
Figure 4-20: USB Connector
4.7.3 VGA Monitor Connection
The PICOe-HM650 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the PICOe-HM650, please follow the instructions below.
Step 1:
Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2:
Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3:
Insert the VGA connector. Once the connectors are properly aligned with the