IEI Integration PICOe-HM650 - Manual (Page 69)

PICOe-HM650 Half-size PCIe CPU Card
Page 55
Jumper Settings: See Table 4-2
Jumper Location: See Figure 4-8
The AT/ATX Power Select jumper specifies the systems power mode as AT or ATX.
Setting Description
Short 1-2 Use ATX power (Default)
Short 2-3 Use AT power
Table 4-2: AT/ATX Power Mode Jumper Settings
Figure 4-8: AT/ATX Power Mode Jumper Location
4.4.2 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type: 3-pin header
Jumper Settings: See
7
Table 4-3
Jumper Location: See
7
Figure 4-9
If the PICOe-HM650 fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, use the jumper
cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1
and 2.