Figure 4-1: unlocked retention screw – IEI Integration PICOe-HM650 User Manual
Page 62
Advertising
PICOe-HM650 Half-size PCIe CPU Card
Page 48
WARNING:
DO NOT touch the pins at the bottom of the CPU. When handling the
CPU, only hold it on the sides.
Step 1:
Unlock the CPU retention screw. Make sure the retention lock is unlocked.
See Figure 4-1.
Figure 4-1: Unlocked Retention Screw
Step 2:
Inspect the CPU socket. Make sure there are no bent pins on the CPU.
Remove any debris from the CPU socket using compressed air.
Step 3:
Correctly Orientate the CPU. Make sure the pins are facing down.
Step 4:
Correctly position the CPU. Match the Pin 1 mark on the CPU with the marked
corner on the CPU socket. See Figure 4-1.
Step 5:
Align the CPU pins. Carefully align the CPU pins with the holes in the CPU
socket.
Advertising