Figure 4-5: align the cooling kit – IEI Integration PICOe-HM650 User Manual
Page 65
Advertising
PICOe-HM650 Half-size PCIe CPU Card
Page 51
Figure 4-5: Align the Cooling Kit
Step 4:
Place the cooling kit onto the CPU. Push down the fan with some pressure to
secure the cooling kit with the support bracket. See Figure 4-6.
Step 5:
Tighten the screws. Use a screwdriver to tighten the four screws. In a diagonal
pattern, tighten each screw a few turns then move to the next one, until they are
all secured. Do not overtighten the screws. See Figure 4-6.
Step 6:
Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the board. Carefully route the cable away from heat generating chips and fan
blades.
Step 0:
Advertising