3 usb cable (dual port) with slot bracket, Figure 4-17: sata power drive connection – IEI Integration PICOe-HM650 User Manual
Page 79
PICOe-HM650 Half-size PCIe CPU Card
Page 65
Figure 4-17: SATA Power Drive Connection
4.6.3 USB Cable (Dual Port) with Slot Bracket
The PICOe-HM650 is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1:
Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2:
Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the PICOe-HM650 USB connector.
Step 3:
Insert the cable connectors
.
Once the cable connectors are properly aligned
with the USB connectors on the PICOe-HM650, connect the cable connectors to
the on-board connectors. See Figure 4-18.