IEI Integration IBX-530B-N270 - Manual (Page 46)

IBX-530B-270 Embedded System
Page 34
Figure 4-3: CF Card Installation
Step 4: Replace the CF card slot cover. Step 0:
4.2.6 Foot Pad Installation
The IBX-530B-N270 embedded system is shipped with four foot pads. To install the foot
pads, follow the instructions below.
Step 1: Turn the IBX-530B-N270 embedded system over.
Step 2: Locate the four retention screw holes for the food pad in the bottom surface.
Step 3: Align the hole of the foot pad with the retention screw holes on the bottom
surface.
Step 4: Secure the foot pad to the chassis by inserting the retention screw. (Figure 4-4).