7 mounting the system with wall mount kit, Figure 4-4: foot pads installation – IEI Integration IBX-530B-N270 User Manual
Page 47
Advertising
IBX-530B-270 Embedded System
Page 35
Figure 4-4: Foot Pads Installation
4.2.7 Mounting the System with Wall Mount Kit
To mount the embedded system onto a wall using the VESA MIS-D 75 wall mount kit,
please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four bracket screw holes on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (Figure 4-5).
Advertising