IEI Integration IBX-530B-N270 - Manual (Page 51)

IBX-530B-270 Embedded System
Page 39
Step 3: Place the DIN rail flush against the back of the mounting bracket making sure
the edges of the rail are between the upper and lower clamps (Figure 4-10).
Figure 4-10: Mounting the DIN RAIL
Step 4: Secure the DIN rail to the mounting bracket by turning the top screw clockwise.
This draws the lower clamp up and secures the embedded system to the DIN
rail (Figure 4-11).
Figure 4-11: Secure the Assembly to the DIN Rail
4.2.9 Cable Connections
Once the system has been mounted on the wall, the following connectors can be
connected to the system.