IEI Integration IBX-530B-N270 - Manual (Page 48)

IBX-530B-270 Embedded System
Page 36
Figure 4-5: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the bottom panel of the system and tighten until the screw
shank is secured against the bottom panel (Figure 4-6).
Step 7: Align the mounting screws on the IBX-530B-N270 bottom panel with the
mounting holes on the bracket.
Step 8: Carefully insert the screws through the holes and gently pull the monitor
downwards until the IBX-530B-N270 rests securely in the slotted holes (Figure
4-6 ). Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.