IEI Integration AFL-4 series-N270 v1.05 - Manual (Page 48)

AFL-4 Series-N270 User Manual
Page 48
Figure 4-3: CF Card Location
Step 3: Replace the CF card slot cover.
Step 4: Reinsert retention screw. Step 0:
4.7 HDD Installation (AFL-412A and AFL-415A/AE Only)
To install the HDD into the AFL-412A/AFL-415A/AE, please follow the steps below:
Step 1: Remove the aluminum cover..
Step 2: Remove the four HDD bracket retention screws and lift the HDD bracket off the
panel PC.
Step 3: Attach the HDD brackets to the HDD. To do this, align the four retention screw
holes in the both sides of the HDD bracket with the retention screw holes on the
sides of the HDD. Insert four retention screws into the HDD bracket (Figure
4-4).