2 in-wall mounting, Figure 4-12: secure the panel pc, Figure 4-13: cut foam tape – IEI Integration AFL-4 series-N270 v1.05 User Manual
Page 60
Advertising
AFL-4 Series-N270 User Manual
Page 60
Figure 4-12: Secure the Panel PC
4.10.2 In-wall Mounting
Before installing into a wall mounting, attach the adhesive strips to the sides as shown
below:
Step 1:
Place the AFL-4 Series-N270 face down on a flat surface.
Figure 4-13: Cut Foam Tape
Step 2:
Cut the adhesive foam tape as shown above.
Advertising