IEI Integration AFL-4 series-N270 v1.05 - Manual (Page 66)

AFL-4 Series-N270 User Manual
Page 66
Step 2: Align the connector. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the AFL-4 Series-N270. See
Figure 4-22.
Figure 4-22: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
4.11.2 Serial Device Connection
The AFL-4 Series-N270 has two RJ-45 COM port connectors for connecting to RS-232
and RS-232/422/485 serial devices on the bottom panel. Follow the steps below to
connect a serial device to the AFL-4 Series-N270 panel PC.
Step 1: Locate the RJ-45 COM port connectors. The location of the connector is
shown in Chapter 2.
Step 2: Align the connector. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the AFL-4 Series-N270. See
Figure 4-23.