IEI Integration AFL-4 series-N270 v1.05 - Manual (Page 65)

AFL-4 Series-N270 User Manual
Page 65
Step 3: Align the retention screw holes on the mounting arm interface with those in the
flat panel PC. The arm mount retention screw holes are shown in Figure 4-21.
Figure 4-21: AFL-412A-N270 Arm Mounting Retention Screw Holes
Step 4: Secure the flat panel PC to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the flat panel PC.
Step 0:
4.11 Bottom Panel Connectors
4.11.1 LAN Connection
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.
Step 1: Locate the RJ-45 connector on the bottom panel of the AFL-4 Series-N270
Series.