D.2.4 building the recovery partition – IEI Integration AFL2-12A-HM65 v1.12 User Manual
Page 155
Advertising
AFL2-12A-HM65 Series Panel PC
Page 141
D.2.4 Building the Recovery Partition
Step 1:
Put the recover CD in the optical drive.
Step 2:
Start the system.
Step 3:
Boot the system from the recovery CD. When prompted, press any key to
boot from the recovery CD. It will take a while to launch the recovery tool. Please
be patient!
Figure D-6: Launching the Recovery Tool
Step 4:
When the recovery tool setup menu appears, press <2> then <Enter>.
Figure D-7: Manual Recovery Environment for Windows
Advertising